| Izinto | Amandla |
| ukuhlukaniswa kwebhodi | Isisekelo se-Aluminium, Ithusi Isisekelo, i-iron Base, i-ceramics base-clad yethusi, Ibhodi Le-Bade Elihlanganisiwe |
| impahla | Okwasekhaya I-aluminium, ithusi lasekhaya, i-lmported aluminium, lmported ithusi |
| ukwelashwa kwendawo | I-HASL/ENIG/OSP/isiliva |
| i-akhawunti yesendlalelo | ibhodi eliphrintiwe elinohlangothi olulodwa/ibhodi eliphrintiwe elinamacala amabili |
| maxi.board Usayizi | 1200mm*480mm |
| min.board Usayizi | 5mm*5mm |
| landelela ububanzi/apsce | 0.1mm/0.1mm |
| i-wap and twist | <=0.5%(ubukhulu:1.6mm,Ibhodi Usayizi: 300mm * 300mm) |
| ukujiya kwebhodi | 0.5mm-5.0mm |
| yethusi fool ukujiya | 35um/70um/105um/140um/175um/210um /245um/280um/315um/350um |
| I-V-CUT degree tolerance | Umzila we-CNC:±0.1mm;punch:±0.1mm |
| Ukubhaliswa kwe-V-CUT | ±0.1mm |
| Imbobo yodonga lwethusi ukujiya | 20um-35um |
| Okuncane ukubhaliswa kwesikhundla somgodi (qhathanisa nedatha ye-CAD) | ±3mil(±0.076mm) |
| Imbobo encane yokubhoboza | 1.0mm ngezansi, 1.0mm (Ukujiya kwebhodi ngaphansi kwe-1.0mm, 1.0mm) |
| Min.punching isikwele slot | 1.0mm ngaphansi, 1.0mm*1.0mm (Ukujiya kwebhodi ngezansi kuka-1.0mm, 1.0mm*1.0mm) |
| Ukubhaliswa kwesekethe ephrintiwe | ±0.076mm |
| Min.drill imbobo ububanzi | 0.6mm |
ukujiya kokwelashwa kwendawo | igolide Plating: Ni 4um-6um, Au0.1um-0.5um ENIG:Ni 5um-6um,Au:0.0254um-0.127um isiliva: Ag3um-8um I-HASL: 40um-100um |
| Ukubekezelelana kwe-V-CUTdegree | ±5(Iziqu) |
| Ibhodi le-V-CUT ukujiya | 0.6mm-4.0mm |
| Min.Lefend ububanzi | 0.15mm |
| Ukuvula imaski ye-Min.Solder | 0.35mm |